Heisei HPC FF Series, User Manual

Page: 41 / 49

HPC FF USER MANUAL
4-35
4.4.6 USB Coniguration
USB Controller
Use this item to enable or disable the use of USB controller.
Intel USB 3.0 Mode
Select Intel® USB 3.0 controller mode. Set [Smart Auto] to keep the USB 3.0 driver enabled
after rebooting (USB 3.0 is enabled in BIOS). Set [Auto] to automatically enable the USB 3.0
driver after entering the OS (USB 3.0 is disabled in BIOS). Set [Enabled] to keep the USB 3.0
driver enabled (Must install driver to use USB devices under Windows® 7). Set [Disabled] to dis‐
able the USB 3.0 ports.
Legacy USB Support
Use this option to select legacy support for USB devices. There are four configuration options:
[Enabled], [Auto] and [UEFI Setup Only]. The default value is [Auto]. Please refer to below
descriptions for the details of these four options:
[Enabled] ‐ Enables support for legacy USB.
[Auto] ‐ Enables legacy support if USB devices are connected.
[UEFI Setup Only] ‐ USB devices are allowed to use only under UEFI setup and Windows / Linux
OS.