Heisei HPC FF Series, User Manual

Page: 4 / 49

IV
Important Safety Precautions
1. Before getting started, read these instructions and save them for later reference.
2. Please disconnect this equipment from any AC outlet before cleaning. Clean with a
damp or dry cloth only. Do not spray any liquid cleaner directly on the screen.
3. The power outlet socket used to plug in the computer power cord must be located near
the system and easily accessible. Do not use outlets on the same circuit of the systems
that are regularly switched on and off.
4. Do not expose the power cord, extension cord and power outlet to moisture or traffic
intensive walkways.
5. Install the equipment on a sturdy and reliable surface to prevent damage caused by
dropping.
6. The openings on the enclosure are for air convection. Protect the equipment from
overheating. DO NOT COVER THE OPENINGS.
7. If the Equipment is sharing an extension cord with other devices, make sure the total
ampere rating of the devices plugged into the extension cord does not exceed the
cord’s ampere rating.
8. If an operating system is not installed, an operating system must be loaded first before
installing any software into the equipment.
9. Disconnect the power cord from the computer before any installation of internal
components. Make sure both the computer and the external devices are turned off. A
sudden surge of power may damage sensitive components. Also make sure the
computer is properly grounded.
10. During installation of any internal components, be sure to ground yourself to discharge
any static electricity. Most electronic components are highly sensitive to static electric
charge. Use a grounding wrist strap and place all electronic components in any
static‐shielded devices. If a wrist‐grounding strap is not available, ground yourself by
briefly touching an unpainted piece of metal.