HEINRICH'S HFR 8204, Operating Instructions Manual

Page: 22 / 120

22
Electrical connections
Before plugging the power cord into an outlet, check that the voltage of the power adapter
you intend to use matches the voltage of the device. This information can be found on the type
plate of the device.
power supply
At this rating it is recommended that you connect to a circuit protected by a 16 amp household
circuit breaker.
ATTENTION : Overload!
• If you use extension cords, the cross-section of these cords should be
at least 1.5 mm².
• Do not use multiple sockets as this device is very powerful.
storage
• Follow the instructions to clean the device and allow it to dry completely. Please note that
drying may not be carried out using any electrical device. (e.g. dryer, microwave, hair dryer,
etc.) Please only use cloths for normal household use.
• If you will not be using the device for a long period of time, we recommend storing the
device in its original packaging.
• Always keep the device in a well-ventilated and dry place out of the reach of children.
standby state
The device switches to standby mode when you do the following:
• When plugging in the power cord.
• When no button is pressed for about 55 – 70 seconds.
• When the set time has expired.
first use
• Check that all accessories are complete and not damaged.