Heinrichs Messtechnik
Installation and Operation Manual PITe
Page 4 of 22
1
Introduction
It is essential that you read these installation and operating instructions, as well
as the associated UMF2 (B) transmitter operating instructions, prior to
installation and commissioning of the device. If the necessary operating manuals
are not at hand, you can download them free of charge from
www.heinrichs.eu
.
The device is to be installed and serviced only by a qualified technician.
Custom designs and special applications are not be addressed in this manual.
All devices are thoroughly tested and checked for order compliance and functionality prior to shipping.
If however you have any queries or problems concerning your purchased product, please contact our
head office in Cologne.
Heinrichs Messtechnik GmbH accepts no liability for any loss or damage of any kind arising
from improper operation of any product, improper handling or use of any replacement part, or
from external electrical or mechanical effects, overvoltage or lightning. Any such improper
operation, use or handling shall automatically invalidate the warranty for the product
concerned.
1.1 Hazard warnings
The purpose of the hazard warnings listed below is to ensure the safety of the device operators and
maintenance personnel, and that the flowmeter and any devices connected to it are not damaged.
The safety advisories and hazard warnings in this document are defined in the four categorised terms
below, and are aimed to prevent putting operators and maintenance personnel at risk, or to avoid
material damage. The used terms have, with respect to this document and the products described
within, the following meanings:
Danger
means that failure to take the prescribed precautions
will result
in death, severe bodily injury, or
substantial material damage.
Warning
means that failure to take the prescribed precautions
could result
in death, severe bodily injury, or
substantial material damage.
Caution
means that failure to take the prescribed precautions
could result
in incorrect operation, malfunction
or damage to the device.
Note
means that the accompanying text contains important information about the product, handling of the
product or is about a section of the documentation that is of particular importance.
1.2 Packaging / storage / transport
Your flowmeter was manufactured in accordance with the highest quality standards and was
thoroughly tested prior to shipment. Upon receipt, please conduct a visual inspection for possible
damage that may have occurred during shipment. If you discover any transit damage, please contact
our head office in Cologne or the local sales office responsible for your area immediately. Besides a
fault description, the type of device in question and its serial number will be required for any claim.
Heinrichs Messtechnik shall not furnish guarantee for any repair work done without prior notice.
Unless otherwise agreed on, the rejected parts must be made available to us in case a claim is made.
