HEINRICH DVA8-500, Installation And Operation Manual

Page: 27 / 33

HEINRICH
①
Through “Quantity allocation(0~32)” user can set the number of business microphone or fireman
microphone which connect to the host, then click “Address assignment...” to set the microphone
parameter
：
(1).“ID” show number of connecting microphone-please set it exactly as connection
；
(2).“NAME” means microphone’s name, set by system automatically
；
(3).“TYPE” means microphone’s type, user can choose between “Fire paging” and “Business paging”
；
(4).“ADDRESS” means microphone address
，
please make the connection microphone is
corresponding with 1-5 number of “link ID”, or microphone can not work OK.
；
Note
：
After modify please double click blank place to make sure no drop down list box in this
photo“ ” then click “OK”
，
or the modify is not successful.

User can use “Paging prompt tone switch” to set the switch and designate warning tone of each
microphone, the way is the same as DVA8 microphone above. You can set more microphone by
click ” to change
；

User can set different zone from first microphone’s 12 group base on different requirement,
click“ ”to add and delete, click “ ” to change different group, the specification of group list
as below
：
（
1
）
“Paging -01 group -01
：
”
：
1) “Paging-01” means microphone’s address is 01
；
2) “group-01”means group is 01, it can be named 02 or 03, from 01-12
；
（
2
）
“host 01
：
01
，
02
，
04
，
05
，
06
；
host 02
：
01
，
02
，
03
，
05
，
06”
：
means zones include all
the host zones except 03 zone(system default host01, user can not change) and include all ex tension
host zone except zone4(extension host named from 02, user can not change)
，
if user paging on group
mode, when you choose group 01means choose host and extension host both 10 zone to page
。
Note
：
please click “Application” after modify
，
or the setting is not successful.