HEINRICH DVA8-500, Installation And Operation Manual

Page: 23 / 33

time of DVA6
HEINRICH

On the left hand is DVA8-500 or DVA8-500RT panel line output control knob,DVA8-500SF’s
just shows current effective line output

DVA8-500SFT’s system group can be set from 0~120, via“”system configuration”-“Equipment
parameter” to confirm the group number (default is six),each zone in the group can set via
“Group”

Put the mouse to the empty place of grouping list and double click or press “ ” to
show all zone status

Please click group items in group list to check zones include the gourp , such as click group
six

Show as below:
In above picture, the blue background in left hand means is chosen, in the right hand shows that there
are six zone in this group . You can add or delete more zone of host or extension host
After modify
please make sure to click “Application” after modify)
①
The red LED on the top right can only reset via the red EMERGENCY button on the front panel
of DVA8-500 or “3-Emergency Reset Input” in rear panel, user can use DVA8 500SF to control the active of
DVA8 message can not be off (zone can be open or off) under the emergency mode.
②
You can check Yellow LED by click ”State” then double click the item you need to check
Operation and control
①
The operation of assigned host and assigned zone are as below (to output the assigned audio or
turn off the zones)

There will be come out one button when move the mouse to the middle of ‘HOST ID’ , then
click “zone 0X” then click it again to control the zone
(the button will be disappear
automatically if click the mouse at anywhere except the button)
②
The single zone control of assigned host
For example, if want to control zone 2 of the host, only need to find ‘ZONE 02’from the right