CORDLESS DRILL
Variable speed control is possible with the on/off switch. The further you press
the switch, the higher the speed of the tool.
Open the chuck. The opening must be large enough to hold the tool. Choose
the needed drill and push it as far as possible in the chuck opening. Tighten the
chuck and check that the drill is secure.
Cleaning and maintenance
Keep the case and cooling vents clean to prevent the motor overheating. Clean
the tool on a regular basis using a cloth.
RECYCLING
Electrical and electronic equipment waste (WEEE) might contain dangerous
materials which can have a negative impact on the environment and human
health if not collected separately.
This item is in conformity with the European Directive EU WEEE (2012/19/EU)
and is marked with an electronic and electrical waste logo graphically
represented in the image below.
This icon shows that WEEE should not be collected with household
waste but separately.
We recommend you to consider the following:
- Materials and components used when manufacturing this item are high
quality materials which can be reused and recycled;
- Do not throw away the item with household waste at the end of life;
- Take the item to a collecting point where it will be collected for free;
- Please contact the local authorities for details on the collecting centers.
Conformity with the RoHS Directive: the item you purchased is in conformity
with the EU Directive RoHS (2011/65/UE). It does not contain materials listed
as harmful or prohibited in the Directive.
Thank you for helping us protect the environment and our health!
Manufactured for
Network One Distribution
Marcel Iancu St., no. 3-5, Bucharest, 020757
2017
Summary of Contents for VTE001
Page 6: ...CORDLESS DRILL TOOL DESCRIPTION ...
Page 9: ...CORDLESS DRILL ...
