Heinner VTE001, Instructions Manual

Page: 3 / 9

CORDLESS DRILL
If you are working outdoors with an electric tool, only use extension cables
which are designed specifically for this purpose.
Using specially designed
outdoor extension cables, the risk of electric shock is reduced.
If operation of the electrical tool in a damp environment cannot be avoided,
use an earth-leakage circuit-breaker.
The earth leakage circuit-breaker
reduces the risk of an electric shock.
Safety of persons
Be careful, watch what you are doing and use an electric tool sensibly. Do
not use the tool if you are tired or under the influence of drugs, alcohol or
medication.
A moment of inattention when using the electric tool can result
in serious injuries.
Wear personal protection equipment. Wearing personal protection (such as
dust masks, non-slip safety shoes, safety helmet or ear protection, depending
upon the type and use of the electric tool) reduces the risk of injury.
Make sure that the appliance cannot start up accidentally. Ensure that the
electric tool is switched off before you connect it to the power supply and/or
insert the battery, or pick up or carry the tool.
If your finger is on the switch
whilst carrying the electric tool or if you connect the appliance to the mains
when it is switched on, this can lead to accidents.
Remove the keys and wrenches before switching on the electric tool. A tool
or key which comes into contact with rotating parts of the appliance can lead
to injuries.
Avoid abnormal working postures. Make sure you stand squarely and keep
your balance at all times. In this way, you can control the electric tool better
in unexpected circumstances.
Wear suitable work clothes. Do not wear loose clothing or jewelry. Keep hair,
clothes and gloves away from moving parts. Loose clothing, jewelry or long
hair can get trapped in moving parts.
If vacuuming devices and draining devices can be fitted, make sure that these
are correctly attached and correctly used. The use of a dust extraction system
can reduce the danger posed by dust.
Usage and treatment of the electric tool
Do not overload the appliance. Use the correct tool for your work. You will
be able to work better and more safely within the given performance
boundaries.
Do not use an electrical tool with a defective switch. An electric tool that
cannot be switched on or off is dangerous and must be repaired.