When using the equipment a
few safety precautions must be
observed to avoid injuries and damage.
Please read the complete operating
manual.
GENERAL SAFETY INSTRUCTIONS FOR
ELECTRIC TOOLS
Workplace safety
Keep your work area clean and well
illuminated. • Do not operate the
electric tool in an environment where
there is a risk of explosions and where
there are inflammable liquids, gases or
dust. • Keep the electric tool out of the
reach of children and other persons.
Electrical safety
The connector plug from this electric
tool must fit into the socket. • Avoid
bodily contact with earthed surfaces
such as pipes, heating, ovens and
fridges. • Keep the tool out of the rain
and away from moisture. If you are
working outdoors with an electric tool,
only use extension cables which are
designed specifically for this purpose.
Safety of persons
Do not use the tool if you are tired or
under the influence of drugs, alcohol or
medication. • Wear personal protection
equipment and safety goggles. • Remove
the keys and wrenches before switching
on the electric tool. • Wear suitable
clothes. Keep hair and clothes and gloves
away from moving parts.
Usage and treatment of the electric tool
Do not overload the appliance. Do not
use an electrical tool with a defective
switch. • Have damaged parts repaired
before using the appliance.
Keep your cutting tools sharp and clean.
Using and handling the cordless tool
Only charge the batteries in chargers
that are recommended by the
manufacturer. • In case of incorrect use,
fluid may escape from the battery. In
case you touch it, rinse the affected area
with water.
Service
Have your electric tool repaired only by
trained personnel using only
PROPER USE
This tool is designed for fast screwing
and unscrewing of screws and cannot be
used as driller.
Technical data
Voltage: 3.6V (Li-ion)1300MAH• No Load
Speed: 210 rpm • Max.Torque:2.5N.M •
Charge Time: 3hours • Adapter -Voltage:
230V/Frequency: 50Hz
Tool description
1 – Chuck • 2 – Work light • 3 – Battery
charge indicator • 4 –
Locking button • 5
– On/Off switch • 6 – Forward/reverse
switch • 7 – on/off lamp button• 8 –
lamp
Operation
Charge the battery before the first use.
The screwdriver can be used in 2
positions: straight and angular.
EN
