Heinner HWM-5080E, Manual

Page: 48 / 136

www.heinner.com
Clean detergent box and grooves

Press down the arrow location on softener cover inside the drawer.

Lift the clip up and take out softener cover and wash all grooves with water.

Restore the softener cover and push the drawer into position.
Clean the tap filter

Close the tap.

Select any procedure except “Wash” or “Drain” procedure

Press the button “Start/Pause” and keep the procedure
running for about 40 seconds.

Remove the inlet pipe from the tap.

Use water to wash the filter.

Reconnect the inlet pipe.
Washing the filter in washing machine

Screw off the inlet pipe from the backside of the machine.

Pull out the filter with long nose pliers and reinstall it back
after being washed.

Reconnect the inlet pipe.

Open the tap and make sure there is no water leakage.

Close the tap
Clean inlet filter

Inlet filter shall must be cleaned if there is not any or
insufficient water in when the tap is opened.
47