Heinner HWM-5080, Manual

Page: 47 / 130

www.heinner.com
46
Note: Generally, the tap filter is washed first and then the filter in washing machine will be washed. If
only the filter in washing machine is washed, then the steps 1~3 in cleaning the tap filter shall be
repeated.
Attention !
Pull out the power plug to avoid electrical shock before washing. After using the washing machine,
pull out the power cord and close the door tightly to avoid pinching the kids.
Remove foreign matters: Drain Pump Filter. Drain pump filter can filter the yarns and small foreign
matters from the washings. Clean the filter periodically to ensure the normal operation of washing
machine.
Warning!!!
First, drain the water with drain pump and then open the drain pump to clean away foreign matters
from drain pump filter. Take care if the drained water is hot.
Cleaning the pump
Important! According to the soil level within the cycles and the frequency of the cycles,you have to
inspect and clean the filter regularly. The pump should be inspected if the machine does not empty
and/or spin. The machine makes an unusual noise during draining due to objects such as safety
pins,coins etc., blocking the pump.
Proceed as follows:
1. Disconnect the appliance.
2. If necessary wait until the water has cooled down.
3. Open the service panel .Place a container close to collect any spillage.
4. When no more water comes out, unscrew the pump cover and remove it. Always keep a rag nearby
to dry up spillage of water when removing the cover..
5. Remove any objects from the pump impeller by rotating it.
6. Screw the pump cover fully in.
7. Close the service panel