Heinner HWM-5080, Manual

Page: 43 / 130

www.heinner.com
42

Synthetic: You can select this procedure to wash the quite delicate clothes. The procedure is
shorter compared with that for cottons and the washing intension is quite gentle. It is
recommended to wash synthetic articles, for example: shirts, coats, blending. As for curtains
and laced textiles, the procedure “Synthetic ” shall be selected. While washing the knitting
textiles, detergent quantity shall be reduced due to its loose string construction and easily
forming bubbles.

Wool: You can select this procedure to wash the wool textiles labeled with “Machine Wash”.
Please select the proper washing temperature according to the label on the articles to be
washed. Furthermore, the proper detergent shall be selected for wool textiles.

Underwear: Underwear cycle which is specially made for washing underwears is more
demanding on rinsing strength and will operate one more time than other cycles.

Quick: This procedure is suitable for washing few and not very dirty clothes quickly.

Cotton Eco: To increase the washing effects, main additional washing time is increased. It is
recommended to wash the clothes for babies or worn by the persons with allergic skin.

Spin: Separate Spin Procedure. Soap water or rinse water shall be drained out before spinning.

Drum Clean: This cycle is specially set in this machine to clean the drum and tube. It applys 90 °C
high temperature sterilization to make the clothes washing more green. When this procedure is
performed, the clothes or other washing cannot be added. When proper amount of chlorine
bleaching agent is put in, the barrel cleaning effect will be better. The customer can use this
procedure regularly according to the need.

Bubble removal function: Bubble Check Function: Redundant bubbles will occur when there is
excessive detergent, which will affect Wash and Rinse effects. The procedure will check
automatically and one bubble removal procedure will be added automatically to remove
bubbles when excessive bubbles are checked. It will also remind the user to use less detergent
during the next similar washes.

Suppression of the acoustic signals: This is an additional buzzer function on your appliance.
After deactivating the buzzer function, the buzzer will be closed. After starting the machine,
press the “Temp.” button for 3 seconds and you will hear a beep, then the buzzer will be closed.
To restore the buzzer function, press the “Temp.”button again for 3 seconds. The setting will be
kept until the next reset.
Warning!!! After deactivating the buzzer function, the sounds will not be activated any more
before you reset it.