Heinner HSWM-84WH, Manual

Page: 15 / 91

www.heinner.com
14
VI. CLEANING AND MAINTENANCE
Cabinet maintenance
After using the washing machine, wipe the moisture and stain on it with a piece of soft cloth.To avoid
damage to the surface, do not use corrosive or volatile chemicals.
Cleaning the lint filter
- Press the button head, and pull the lint filter out.
- Turn the filter net inside out, and rinse it in water.
- After inserting the claw, press the button to insert it into place.
- A sound of “ba” means proper installation.
Anti-freezing protection
▲
To prevent from freezing:
- Turn off the water tap, remove the water inlet hose and empty water in the water inlet hose completly
- Lay the drain hose and turn the drain selector knob to the "Drain”position to empty the water in the
tub.
▲
If the water is frozen, please take the following steps:
- Put the water inlet hose into warm water of about 50
℃
.
Keep about 2 liters of warm water below 50
℃
in the wash tub for about 10 minutes and then lay the
drain hose and turn the wash drain selector knob to the "Drain”position to empty the water.
Fit the water inlet hose and turn on the water tap to confirm water filling and draining work properly.
Operation when objects are dropped into the outside of the spin tub
①
Remove all screws on the frame with a screw driver and loosen the connector of the brake belt .
②
Pull up the frame with both hands and turn it backwards.
③
Take out the clothes dropped into the outside of the spin tub.
④
Fasten the connector of the brake belt ,Press the frame to reset and tighten screws.
After you use the washing machine, never forget to do the following two things:
1. Disconnect the power plug
2. Remove the water inlet hose.