Heinner HSWM-84WH, Manual

Page: 16 / 91

www.heinner.com
15
MAINTENANCE

Do not connect to the hot water supply.

After using, be sure to unplug the power plug.

Be sure to use plug that is properly grounded.

The maximum gradient of the supporting surface for the washing machine should not exceed 2º.

Do not tear down electrical wires and components in the machine by yourself.

There are holes on the base for ventilation. These holes should not be blocked by foreign objects
(carpets, etc.).

Never connect the grounding wire with the live wire, or it may lead to an electric shock.

If the power cord is damaged, it must be replaced by a qualified person to avoid a hazard.
If the following symptoms occur, please disconnect the power plug and perform the following checks:
Symptom Reason
The washing machine does not
work.
Check that the power supply is in good condition.
Check that the power plug is inserted properly.
Check that the wash timer knob or the spin timer knob is not in
the "0" position.
The drain hose does not work. Check that the drain hose is not laid too high.
Check that the drain hose is not frozen.
Check that the drain hose is not blocked by foreign matter.
There is abnormal noise during
washing.
Check that the drain hose is not blocked by foreign matter.
Check that there are no coins or any other foreign objects
dropped into the wash tub.
There is abnormal noise and
violent vibration during spinning.
Check that the washing machine is placed on flat, stable floor.
Check that clothes are evenly distributed in the spin tub.
Check that there are no washing materials or foaming debris
dropped into the outside of the spin tub.