Heinner HSWM-64TC, Manual

Page: 16 / 30

www.heinner.com 520W, 50-60Hz, 220-240V
15
A.
C. WASHING PROCEDURE
B.
WASHING

Water inlet: Select the water level to the desired position.

Add in the water and dissolved detergent to make the water reach the expected level.

Operate the machine to stir the detergent evenly by turning the Wash Knob.

Put in laudry.

Select washing duration to the weight of laundry.

Select washing type (Normal/Gentle) according to the weight of laundry. After each washing
operation ends, set the Wash Selector to Drain
DRAIN THE WATER

The used water will flow through the drain pipe upon turning the Drain Selector to Drain position.
Be sure to turn the Drain Selector immediately back to Normal position when the water is
completely gone from the Wash tub.
INTERMEDIATE-SPIN (removing detergent/dry)

Move laundry from wash tub to spin tub

Spin to remove dissolved detergent
a. Arrange laundry uniformly in the spin, without stacking them all on one side. An unbalanced
spin may cause abnormal vibration and noise.
b. Press the laundry down firmly and place the spinner cap on top of them.
c. After rinsing, close the outer cover of the spin tub and spin for 1 minute.

Soak rinse
a. Place the laundry into the wash tub and then select suitable washing type.
b. Select the water level according to the amount of laundry.
c. Rinse: set the timer to 0-5 minutes and let it rinse.

Dry spin
a. Arrange laundry uniformly in the spin tub without stacking them all on one side. An
unbalanced spin may cause abnormal vibration and noise.
b. Press the laundry down firmly and place the spinner cap on top of them.
c. Select suitable spoinning duration according to the quatity of laundry (1 min, 3mins, 5 mins).