Heinner HSA-1000XMC, Manual

Page: 18 / 55

www.heinner.com 1000W, 50/60Hz, 220-240V
17
6. Plug the power outlet, a long buzzers will be heard, the display will display “0:00”
after 1s, only the “Mode” button can be activated.
7. Press the “Mode” button, the display will display continuously:
a. steamed bread
b. steam rice
c. steam fish
d. steam chicken or meat
e. steam vegetable.
Select your desired program, the LCD will display the default steaming time, and the
steaming time can be changed by pressing the “
＋
” and “
－
” button.
8. The unit has automatic start function, the max delay time is 12 hours and 59
minutes. If you do not want to the steamer start operation immediately, you may set
the automatic start function by pressing the “Min” as follows:
For example: Set the unit begins working after 2 hours and 30minutes.
1). Operate according to the above 1-8 steps, press “Min” button once, a icon of alarm
clock will display in the left of display, and the “00” begin to flash.
2). Adjust the “00” to the “30” by pressing the “
＋
” and “
－
” button, then press the
“Min” button again and “0” begin to flashing, adjust the “0” to “2” by pressing “
＋
”
and “
－
” button, confirm the setting by pressing “Min”.
3). Press the “On/Off” button, a long buzzers will be heard, the indicator will indicate
green and flash, the LCD count down, when the time is “0:00”, the icon of alarm clock
will disappear, the indicator will indicate red and stop flashing, the unit begins to
working.
4). When the operation is finished, the buzzer will beep.
NOTE: The minimum operation time of every mode is them default time, the
maximum is 59 minutes. During operation, you can cancel the setting by pressing the
“On/Off” button for 2 seconds.
Cancellation of the automatic start program: Press the “On/Off” for 2 seconds and a
long buzzer will be heard, the icon of alarm clock will disappear, the time return to
zero and cancel all the setting.
9. During work, don’t touch the base, rice pan and steamer columns, always use
groves when handling the food steamer.
10. After finishing steaming, unplug the appliance from the outlet and let it cool
completely before removing the reservoir.
NOTE: Be careful when removing the drip tray, while other parts of the unit may cool
down, water in the reservoir and drip tray is still very hot.
11. Discard the water after each using, next cycle pour the tap water again.
12. Store the food steamer after all parts cool down completely and place it at the dry
location such as a table top or counter top or a cupboard shelf. The power cord may
be wound under the bottom of steamer.