www.heinner.com 2000-2400W, 50Hz, 220-240V
V. USING INSTRUCTIONS
BEFORE FIRST USE
1. Remove any sticker, protective foil or storage cover from the soleplate.
2. Heat up the iron to maximum temperature and iron over a piece of damp cloth for
several minutes for the purpose of removing any residue on the soleplate according to
the section of “Steam ironing”.
NOTE: It is normal that strange odor comes out from the unit for the first use. This will
cease after a short while.
NOTE: Some particles may come out of the soleplate when you use the iron for the first
time. This is normal; the particles are harmless and stop coming out of the iron after a
short while.
NOTE: When you switch on the appliance, the steam station iron may produce a pumping
sound. This is normal; the sound tells you that water is pumped into the soleplate.
NOTE: During the heating process of the soleplate, there will be little steam coming out
from the soleplate automatically and this phenomenon will continue for about 3 seconds,
This is normal.
USING THE APPLIANCE
The appliance has two iron portions. You can use dry ironing or steam ironing. The details
refer to the following:
Dry ironing
1. Put the iron on the steam station iron’s thermal insulating cushion.
2. Connect the plug to wall outlet, one “D” sound of buzzer can be heard and the
working indicator starts to illuminate.
3. Turn temperature dial to your desired setting, which is depended on the fabric of
garment, refer to IRONING TIPS latter. The soleplate starts to be heated up and the
working indicator begins to flash.
4. When the working indicator changes from flashing to illuminating, it means the
selected temperature is reached and you now can start ironing.
WARNING: Never touch hot soleplate at any time before cooling down!
Steam ironing
1. Grasp the water tank handle with the hand and press the tank release button with one
finger to move out the water tank. Open the filling cap and fill water into the water tank.
You had better use purified water with less calcium particles. After it, close the filling cap.
The max capacity of water tank is 1.8L, the water level shall not be exceeded the MAX
mark.
Note: If the tap water in your area is very hard, we advise you to mix it with an equal
amount of distilled water.
2. Replace the detachable water tank properly.
Note: If the water tank is not properly placed, the iron does not produce any steam.
