www.heinner.com 2000-2400W, 50Hz, 220-240V
III. SAFETY MEASURES
Before using the electrical appliance, basic precautions should always be followed
including the following:
1. Read all instructions.
2. Before using check that the voltage of wall outlet corresponds to the one
shown on the rating plate.
3. Do not use the appliance if the main cord, plug, light or the appliance itself
shows visible damage, or the appliance has been dropped or is leaking. Take it to
the nearest authorized service facility or a qualified serviceman for examination
and repair in order to avoid a hazard.
4. Do not allow the cord to come into contact with the soleplate when it is hot.
5. Burns may occur from touching hot metal parts, hot water, or steam
6. Do not let cord hang over edge of table or hot surface.
7. To protect against a risk of electric shock, never immerse the iron in water or
other liquids. If this has happened, do not use this appliance anymore; dispose of
the appliance.
8. Keep the appliance out of the reach of children.
9. Do not leave iron unattended while connected into power supply or on an
ironing board.
10. Always place or use the appliance on a stable, level and horizontal surface.
11. The use of accessory not recommended by manufacturer may cause injury to
persons or damage to appliance.
12. When placing the iron on its stand, ensure that the surface on which the
stand is placed is stable.
13. The filling aperture must not be opened during use. Instructions for the safe
refilling of the water reservoir shall be given.
14. Never fill the water tank with hot water, scent, vinegar, starch, descaler, fabric
softener or another chemical reagent.
15. Unplug from outlet when not in use, before filling water or cleaning.
16. Do not use the appliance for other than its intended use.
17. The iron must not be left unattended while it is connected to the supply
mains;
18. The plug must be removed from the socket-outlet before the water reservoir
is filled with water.
19. The iron must be used and rested on a stable surface;
20. The iron is not to be used if it has been dropped, if there are visible signs of
damage or if it is leaking;
21. Do not use outdoors.
22. Save these instructions.
23. The user must not leave the iron unattended while connected to the supply.
