Heinner HFSC-V60LITGC-SL, Instruction Manual

Page: 51 / 129

www.heinner.com
50
Use of gas burners
Ignition of the burners
The position symbol above each control knob indicates the burner that the knob
controls.
Manual Ignition of the Gas Burners
If your appliance is not equipped with an ignition aid, or in case there is a failure in
the electric network, follow the procedures listed below.
For Hob Burners : Push in the knob of the burner you wish to ignite and keep it
pressed while turning it anti-clockwise until
the knob is in the ‘maximum’ position.
Continue pressing the knob and hold a lit match, taper or other manual aid to the
upper circumference of the burner. Move the ignition source away from the burner
as soon as you see a stable flame.
Electrical ignition by control knob
Push in the knob of the burner you wish to ignite and keep it pressed while turning it
anti-clockwise until the knob is in the 90 degrees position.The microswitch under the
knob will create sparks through the spark plug for as long as the control knob is
pressed. Press the knob until you see a stable flame on the burner.
Flame safety device
Hob burners
Hobs equipped with a flame failure device provide security in case of an accidentally
extinguished flame. If such a case occurs, the device will block the burners gas
lines and will avoid any accumulation of unburned gas. Wait 90 seconds before re-
igniting an extinguished gas burner.
VII. USING THE PRODUCT