Heinner HFF-160A+, User Manual

Page: 39 / 80

www.heinner.com
38
Problem possible cause Solution
Appliance dose not work.
Appliance is not switched on. Switch on the appliance.
Main plug is not plugged in or is
loose. Plug the appliance into the electrical
socket.
Fuse has blown or is defective. Check fuse, replace if necessary.
Outlet is defective. Defective parts need to be repaired by an
electrician.
Appliance cools too much. Temperature is set too cold. Turn the temperature regulator to a
warmer setting temporarily.
The food is too warm.
Temperature is not properly
adjusted. Please refer to the “Initial Start
Up” section.
Door was open for an extented
period. Open the door only as long as necessary.
A large quantity of warm food
was placed in the appliance
within the last 24 hours. Turn the temperature regulator to a
warmer setting temporarily.
The appliance is near a heat
source. Please refer to the “Installation Location”
section.
Interior lighting dose not
work. Light bulb is defective. Please look in the “Changing the Light
Bulb” section.
Heavy build-up of frost,
possibly also on the door seal. Door seal is not air-tight (possibly
after reversing the door).
Carefully warm the leaking sections of the
door seal with a hair dryer (on a cool
setting). At the same time, shape the
warmed door seal by hand so that it sits
correctly.
Unusual noises.
Appliance is not level. Readjust the feet.
The appliance is touching the
wall or other objects. Move the appliance slightly.
A component, e.g. a pipe, on the
rear of the appliance is touching
another part of the appliance or
the wall. If necessary, carefully bend the
component out of the way.
XI. TROUBLESHOOTING
WARNING! Before troubleshooting, disconnect the power supply. Only a qualified electrician
or other personnel must carry out the troubleshooting that is not in the manual.
Important! Repairs to the appliance may only be performed by competent service engineers.
Improper repairs can give rise to significant hazards for the user. If your appliance needs
repairing, please contact your specialist dealer or your local Customer Service Center.