www.heinner.com 850W, 50Hz, 220-240V
2
V. USING INSTRUCTION
NOTE:
1.
Please note that for making coffee and frothing milk you have to use the same
knob. The correct position of the knob for coffee is up and for making frothing
milk is down.
2.
Please note that it is normal that at the first use, there will be a plastic taste, but
after a while, it will disappear.
3.
In addition, it is normal for the espresso maker to drip some water when it is
heating up the water or when it is used the frothing milk option.
4.
In order to enjoy a great cup of coffee, it is necessary to let the water reach the
correct temperature.
To ensure the first cup of coffee tastes excellent, you should rinse the coffee maker with
warm water as following:
1.
Pull out the water tank of the coffee maker. Pour water into water tank, the water level
should not exceed the “MAX” mark in the tank, and then insert it into the coffee maker.
Note: The appliance is supplied with a removable tank for easy cleaning; you can fill the
tank with water firstly, and then insert the tank into the appliance.
2.
Set steel mesh into metal funnel (no coffee in steel mesh).
3.
Place an jug on removable shelf. Make sure the steam control knob is on the OFF
position. Note: the appliance is not equipped with jug, please use yourself jug or coffee
cup
.
4.
Connect to power sourc. Press the power button “
” one time, the red indicator is
illuminated.
5.
Press the pump control switch to the “
” position, the pump will pump water, when
there is water flowing out and close the pump by pressing the pump control switch to
“
”, press the coffee/steam selector to the “
” position and wait for a moment, the
appliance begins to be pre-heated until the inner lamp of pump control switch is
illuminated, it shows the pre-heating is finished. Press the pump control switch to “
”
position again, and water will flow out.
6.
After water does not drop out any more, you can pour the water in each container out
then clean them thoroughly, now you can start brewing. Note: There may be noise when
pumping the water for the first time, it is normal, the appliance is releasing the air inside.
After about 20s, the noise will disappear.