Heinner HDCH-690TSS, Manual

Page: 7 / 58

www.heinner.com 190W, 50Hz, 220-240V
6
•
The angle of the bend of the expansion pipe should not be less than 120º; you
must direct the pipe horizontally, or, alternatively, the pipe should go up from the
initial point and should be led to an outer wall.
•
After the installation, make sure that the cooker hood is level to avoid grease
collection at on end.
•
Ensure the expansion pipe selected for installation complies with relevant
standards and is fire retardant.
Warning:
➢
For safety reason, please use only the same size of fixing or mounting screws which
are recommended in this instruction manual.
➢
Failure to install the screws or fixing device in accordance with these instructions
may result in electrical hazards.