Heinner HDCH-690TSS, Manual

Page: 12 / 58

www.heinner.com 190W, 50Hz, 220-240V
11
Note:
•
Before changing the lights, make sure that the appliance is turned off and
unplugged.
•
Protect against danger when changing lights, such as wearing gloves.
Changing the lights:
•
Remove the grease filter.
•
Find out the junction box, unscrew the screws on the junction box cover, then
take down the junction box cover (If there is wire pressing plate which pressed
the light wire, the wire pressing plate needs to be dismantled first). See Pic 1. The
junction box has version a and b, depending on different models.
•
Find out the terminal of the light connecting wire and pull it out. See Pic 2.
•
Use a tool or the hand to press the spring splinter of both sides of LED light to the
inside, until the light is pressed out, then slightly pull the light connecting wire
out. See Pic 3.
•
Apply the reverse procedure to install the light back.
–
LED modules – round lamp
– Max wattage: 2x1.5 W
– Voltage range: AC 220-240V
– Dimensions