Heinner HCF-249M, Manual

Page: 6 / 43

www.heinner.com
5

Cleaning
1. Dusts behind the freezer and on the ground shall be timely cleaned to improve the
cooling effect and energy saving. The interior of the freezer should be cleaned regularly
to avoid odor. Soft towels or sponge dipped in water and non-corrosive neutral
detergents are suggested for cleaning. The freezer of shall be finally cleaned with clean
water and dry cloth. Open the door for natural drying before the power is turned on.
2. Do not use hard brushes, clean steel balls, wire brushes, abrasives, such as
toothpastes, organic solvents (such as alcohol, acetone, banana oil, etc.), boiling water,
acid or alkaline items clean refrigerator considering that this may damage the fridge
surface and interior.
3. Do not rinse with water so as not to affect the electrical insulation properties. Please
use a dry cloth when cleaning temperature control knob and electrical components.
Please unplug the freezer for defrost and cleaning.

Defrost
1. Freezer shall be manually defrosted.
Unplug the freezer and open the freezer door, remove foods and drawers before
defrosting;
Open the outflow holes and drainage holes (and place water container at the outflow
holes); indoor frost will naturally melt, wipe the defrost water with a dry, soft cloth.
When the frost softens, an ice scraper might be used to the accelerate de-icing process.
2. Please remove the food and put in a cool place when defrosting before removing
accessories.
Other mechanical devices or other means shall not be used to accelerate except those
recommended by the manufacturer. Do not damage the refrigerant circuit.

Stop using
Foods can be preserved for a couple of hours even in summer in case of power failure; it
is recommended to reduce the frequency of opening door and do not put fresh foods
into the freezer.
Please unplug the freezer left unused for a long time for cleaning. Keep the door open
to avoid the bad odor.
Do not turn upside, horizontally place or vibrate the refrigerator, the carrying angle can
not be greater than 45°. Please hold the door and hinge when moving.
Continuous operation is recommended when the freezer is started. Please do not
move the freezer under normal circumstances so as not to affect the freezer's service
life.
VI. CLEANING AND MAINTENANCE