Heinner Forest Breeze Sense 600, Instruction Manual

Page: 36 / 73

www.heinner.com 75W, 50/60Hz, 220-240V
35
Common malfunctions, error code description, and troubleshooting method.
Problem Solution
Cannot turn on power or pressing button has
no Response.
1. Is the Power cord plugged in? Plug in the power
cord.
2. Is the purifier covered? Close the front cover.
3. Is the machine placed vertically on the ground?
Place the machine on a flat surface.
4. Is the machine in child-lock mode?
When “Child - lock” appears on the display, hold the
lock/reset button for 5 seconds to turn off the
child-lock.
1. The air is dirty, but the air pollution
indicator says "green".
2. The air pollution indicator remains "red"
even when continuously running.
1. Is the purifier in a place that cannot easily absorb
the dirty air (dust)? Move it somewhere else.
2. Is the particulate sensor dirty? Clean the
particulate sensor.
The smell of the exhaust vent is Unpleasant.
1. Is the filter dirty? Clean the filter.
Has the filter been replaced in a long time? Replace
the filter.
Do not automatically enter sleep mode at
night.
Are the purifiers running in manual mode? Press the
"auto" button on the operation panel to ensure that
the purifier runs in automatic mode.
The purifier has been running for a long time
but has had no significant improvement in air
Quality.
1. Was the plastic bag on the filter removed?
Remove the plastic bag from the filter before using.
2. Is the filter order incorrect?
The filter alarm lamp is on.
It indicates that the timing of the timing of the filter
changes to the set value.
When you replace the filter long press the reset
button to reset.
VII. TROUBLESHOOTING