Heinner Forest Breeze Sense 600, Instruction Manual

Page: 31 / 73

www.heinner.com 75W, 50/60Hz, 220-240V
30
This machine has a filter timing reminding function, setting time for 1500
hours, when the machine runs to set time. the indicator light on the panel will light up,
reminding the user to replace the filter. The reset function of the button at this time iIs
effective, touch this button to reset the timing and reopen the timing.
In the open state, when the sleep function is opened, the machine screen closes
and the whole light of the machine closes. The machine can only work in the sleep mode,
not controlled by the sensor. If the timing function is opened. The machine will work until
the set time. And then will go into the standby state.
(the icons of the button will light on when the sleep function opens, then the machine
goes into sleep after a while, and the lights are all out.)
Note: in automatic mode, when the light of the environment is less than 5-10 lms and the
duration is up to 3 minutes, the machine will automatically enter the sleep mode. When
ambient light is greater than 10 lm and duration is 5 minutes, the machine is out of sleep
mode working state.
When the machine is on, touch "Child-lock" button to lock all the buttons. At
that time all the buttons have no reaction to any touch, while the machine still works how
it is set before. Press "child-lock" button for 5 seconds and the machine will quit this mode.
(The icon will stay on when the machine operates in child-lock mode, otherwise it will be
off).
When the machine is on, touch "+" or "-" to switch the gear and change the
operating speed. After the gear being changed, the motor will work only at the setting level
without being affected by the sensor. (Touch "wind speed" button, and the machine will
quit auto mode).