Heinner Forest Breeze Sense 600, Instruction Manual

Page: 32 / 73

www.heinner.com 75W, 50/60Hz, 220-240V
31
3. Display function description
In the open state, the temperature and humidity sensor opens and does not
need to be preheated to detect the temperature and humidity of the current environment.
The temperature and humidity data of the current environment are shown.
In the open state, the PM2.5 sensor needs to preheat 1 minutes to display the
data, showing the data range of 1-500Ug/m3. When the value of PM 2.5 and its lower
value, the PM 2.5 ug/m3 is on at the same time, which show PM2.5 value of the current
environment.
When the timing function is turned on, this area displays the time unit in hours,
and displays “00” when there is no timing function.
Wind speed gear line corresponding to wind speed gear, from the bottom
to up, each line represents a gear, the highest gear is five.
This icon is displayed as a WIFI connection state, long press speed key for 5
seconds in the standby state. This pattern enters the flicker state (flash for 1 second once),
at this time, the mobile phone APP and machine will go into in the match state, press the
mobile phone APP pair operation, after successful pairing this pattern light will be on
continuously, when the machine is in the environment where there is no WIFI signal. At the
time, this pattern is not bright.