www.heinner.com 105W, 50Hz, 220-240V
8
Light bulb Replacement
Change the lamp
Please make sure you have shut down the hood before replacement,
Take out the Al filter, and push the light out from inside casing.
Pull out the wire from the terminal, and replace a new one.
VII. TROUBLESHOOTING
Fault
Cause
Solution
Light on, but fan
does not work
The fan blade is jammed.
Switch off the unit. Repair to carried out by
qualified service personnel only.
The motor is damaged.
Both light and
fan do not work
LED light bulb burn or
broken.
Replace the bulb with exactly same bulb
model.