Heinner CH-201SS, Instruction Manual

Page: 21 / 60

www.heinner.com 85W, 50Hz, 220-240V
20
VII. CLEANING AND MAINTENANCE
CAUTION
Before maintenance or cleaning is carried out, the cooker hood should be disconnected
from the main supply. Ensure that the cooker hood is switched off at the wall socket
and the plug removed.
External surfaces are susceptible to scratches and abrasions, so please follow the
cleaning instructions to ensure the best possible result is achieved without damage.
GENERAL
Cleaning and maintenance should be carried out with the appliance cold especially
when cleaning. Avoid leaving alkaline or acid substances (lemon juice, vinegar etc.) on
the surfaces.
STAINLESS STEEL
The stainless steel must be cleaned regularly (e.g. weekly) to ensure long life
expectancy. Dry with a clean soft cloth. A specialized stainless-steel cleaning fluid may
be used.
NOTE: Ensure that wiping is done along with the grain of the stainless steel to prevent
any unsightly crisscross scratching patterns from appearing.
CONTROL PANEL SURFACE
The inlay control panel can be cleaned using warm soapy water. Ensure the cloth is
clean and well wrung before cleaning. Use a dry soft cloth to remove any excess
moisture left after cleaning.
IMPORTANT
Using neutral detergents and avoid using harsh cleaning chemicals, strong household
detergents or products containing abrasives, as this will affect the appliance
appearance and potentially remove any printing of artwork on the control panel and
will void manufactures warrantee.
GREASE MESH FILTERS
The mesh filters can be cleaned by hand. Soak them for about 3 minutes in water with a
grease-loosening detergent then brush it gently with a soft brush. Please do not apply
too much pressure, avoid damaging it. (Leave to dry naturally out of direct sun light)
Filters should be washed separately to crockery and kitchen ustensils. it is advisable not
to use rinse aid.