Heinner AJS55A, Instructions Manual

Page: 5 / 29

JIGSAW
4
Technical data
Rated Power: 400W
Voltage: 230V
Frequency: 50Hz
No Load Speed: 3000rpm
Cutting Capacity: 55mm wood/6mm steel
Cable length ~ 2m
Tool description
1 – Button lock
2 – on/off switch
3 – Cooling vents
4 – Dust extractor
5 – Base plate
6 – Blade guide
7 – Protective cover for blade
Before starting the equipment
Check the tool each time before you use it. If any
flaw is visible, take the tool to qualified personnel
to fix it. Do not open the tool.
During the functioning, the level of
noise can reach 85dB - wear ear
protection!
When processing materials that
produce dust or shaving, wear
safety goggles!
Dust from the materials you are
working on, like lead paint, can
harm your organism
– wear a
breathing apparatus.
Clean the surface you will be working on. Make
sure there are no screws or nails hidden in it.
Operation
Check that the voltage is the one indicated in the
specifications of the product (tools with 230V or
240V can also be used with 220V).
Avoid working when the saw blade might cut
hidden electric cables or even the jigsaw’s power
cord. Cutting these wires increases the risk of
electric shock.
Make sure that the work piece you are cutting is
firm on the working table.
Slide the blade into the mounting groove with its
teeth facing forward. Do not use torn or worn out
blades.
Before cutting, make a hole in the work piece to
have a starting point for the saw blade. If you cut
into metal, oil the blade.
To turn on the tool, push the on/off switch.
To lock the tool on, keep it depressed while
simultaneously pressing the lock button in.
To switch off the tool, release the on/off switch.
To unlock
– press and release the on/off switch.
Dust extraction
Attach a vacuum hose to the vacuum connection.
The vacuum cleaner must be suitable for the
material being worked.
After long periods of work at low
stroke rate, the jigsaw can heat up
considerably.
After the tool has been switched off, please make
sure that its motor and mobile parts have stopped.
Cleaning and maintenance
Keep clean the tool case, blades and cooling vents.
Wipe the tool with a cean cloth. Cleaning the tool
is recomended after each use.
RECYCLING
Electrical and electronic equipment waste (WEEE)
might contain dangerous materials which can have
a negative impact on the environment and human
health if not collected separately.
This item is in conformity with the European
Directive EU WEEE (2012/19/EU) and is marked
with an electronic and electrical waste logo
graphically represented in the image below.
This icon shows that WEEE should not be
collected with household waste but
separately.
We recommend you to consider the following:
- Materials and components used when
manufacturing this item are high quality materials
which can be reused and recycled;
- Do not throw away the item with household
waste at the end of life;
- Take the item to a collecting point where it
will be collected for free;