45
Fuse Box
The fuse box is located at the top right–hand side of the front shield. Access to the fuses is gained
by unscrewing the fuse box cover (Fig. 14).
Wheel changing Front wheel
Disconnect Bowden control cable at brake lever and lean the machine over on its right side until
the footplate rests on the ground and loosen 4 cap nuts with the box spanner. Then loosen the
axle nuts until the washers come off the
threads; then remove wheel. If the wheel
does not come out easily, unscrew the
4 nuts of the front mudguard supports.
When reassembling, make sure
.
Fuse box
1. 8 amp. fuse
2. Cable–retaining screw
Summary of Contents for Tourist
