background image

SAFETY AND GENERAL INFORMATION

Save these instructions.

 For your safety 

read, understand, and follow

 the information provided with and on this jack. 

The owner and operator of this equipment shall have an understanding of this jack and safe operating procedures before 

attempting to use. The owner and operator shall be aware that use and repair of this product may require special skills 

and knowledge. Instructions and safety information shall be conveyed in the operator's native language before use of 

this jack is authorized. If any doubt exists as to the safe and proper use of this jack, remove from service immediately. 

Inspect before each use.

 Do not use if broken, bent, cracked, or damaged parts (including labels) are noted. Any jack 

that appears damaged in any way, operates abnormally or is missing parts, shall be removed from service immediately 

and the manufacturer notified. If you suspect that the jack was subjected to a shock load (a load dropped suddenly, 

unexpectedly upon it), immediately discontinue use until the jack has been checked by a factory authorized service 

center (contact distributor or manufacturer for list of Authorized Service Centers). It is recommended that an annual 

inspection be done by qualified personnel. Replace worn or damaged parts with Hein-Werner Authorized Replacement 

Parts only. Labels and owner’s manuals are available from manufacturer.

PRODUCT DESCRIPTION

Hein-Werner Hydraulic Service Jacks are designed to lift, not support, rated capacity loads consisting of one end of a 

vehicle. Immediately after lifting, the load must be supported by a pair of appropriately rated jack stands.

 

Never use hydraulic jack as a stand alone device. After lifting, immediately

 

support the lifted load with a pair of appropriately rated jack stands.

2

SPECIFICATIONS

 

!

Model

Capacity

Min. Height

Max. Height

Jack Size (L x W)

HW93642

2 Ton

4-1/2"

20"

28-1/2" x 14-7/8"

HW93652

3 Ton

5"

23"

31-1/4" x 15-1/2"

Figure 1 - Typical Service Jack Components

Handle

Handle Fork

Saddle

Front Wheel

Caster

Air Vent Screw

Lift Arm

Summary of Contents for HW93642









Reviews: