$8?EPDFÏÏV
Page 2 / 43
SSafety Instructions
x
This manual is an essential part of the unit and contains important hints about
function, correct handling and commissioning. Non-observance can result in
damage to the unit or the machine or even in injury to persons using the
equipment!
x
The unit must only be installed, connected and activated by a qualified electrician
x
It is a must to observe all general and also all country-specific and application-
specific safety standards
x
When this unit is used with applications where failure or maloperation could cause
damage to a machine or hazard to the operating staff, it is indispensable to meet
effective precautions in order to avoid such consequences
x
Regarding installation, wiring, environmental conditions, screening of cables and
earthing, you must follow the general standards of industrial automation industry
x
- Errors and omissions excepted –
General instructions for cabling, screening and grounding can be found in the
SUPPORT section of our website http://
WWWHEINLANZCOM
Version:
Description:
03b /af/hk//Feb 08
Range of PM-Factor, SSI zero position and preselection mode
1 / 2 increase to [-199999, 999999];
load on the current output max. 300 Ohm
07a = 08a/kk/hk/Apr.09
Extensions: Linearization, Activation of serial transmission
09a/kk/hk/Feb.10
Extension from 25 to 32 bits
10a/kk/hk/June.10
Missing encoder alarm, remote start of serial string
10b/af/nw/March 13
Correction of the basic parameter “Analogue Characteristics”
