manualshive.com logo in svg

Heidolph 505-20000-00, Operating Manual, Page: 4 / 36

Share
Download
Heidolph 505-20000-00 Operating Manual Download Page 4

About this Document

4

About this Document

 

Version and variants

Version

This manual describes the function, operation and maintenance of the MR Hei-Standard 

and MR Hei-Tec, MR Hei-Connect magnetic stirrers.

Version

Alteration date

1.3

04.2017

Variants

The device is available in different configurations. Certain features and functions only 

apply to specific configurations. The variants are documented in this manual.

 

About this manual

This operating manual is an integral part of the device described here. 

 

➜

Please read this manual carefully and obey all safety and warning 

notices.

 

➜

Ensure that every operator reads this manual.

 

➜

Ensure that this manual is accessible to all users at all times.

 

➜

Pass the operating manual on to the subsequent owner.

The current version of this operating manual in PDF format is available 

for download from: 
http://www.heidolph-instruments.com/Support/Operation Manuals/

Magnetic Stirrers/All MR Hei- models/MR Hei-Standard, MR Hei-Tec, 

MR Hei-Connect

In addition, please ensure that you comply with all local and national regulations.

Summary of Contents for 505-20000-00





































Reviews:

No comments