Gas fired igniter ZT0
Safety
- 12 -
Status: 11-2018
Highly inflammable materials
WARNING!
Danger of burns due to flammable materials!
Highly flammable materials, liquids or gases can
catch fire and cause serious to fatal injuries.
– Do not smoke in the danger area and in the
close vicinity. Do not use any naked flames or
ignition sources.
– Keep a fire extinguisher on hand.
– Report suspicious substances, liquids or gases
immediately to the responsible officer.
– In case of fire, stop work immediately. Leave
the danger area until the all-clear is given.
Hot surfaces
CAUTION!
Danger of burns due to hot surfaces!
Contact with hot components can cause burns.
– When carrying out any work near hot
components, always wear protective work
clothing and safety gloves.
– Before performing any work, ensure that all
components have cooled to ambient
temperature.
Sharp edges and pointed corners
CAUTION!
Danger of injury on edges and corners!
Sharp edges and pointed corners can cause
chafing of the skin and cuts.
– Take particular care when performing work near
to sharp edges and pointed corners.
– In unsure, wear safety gloves.
Special environmental influences
NOTE!
Danger of damage due to special
environmental influences!
Vibrations affecting the gas fired igniter or welding
work performed in the area of the gas fired igniter
can result in damage.
– In order to prevent damage to the gas fired
igniter, it must not be exposed to any vibrations.
– When carrying out any welding work in the area
of the gas fired igniter, it must be electrically
disconnected and removed.
– Before welding work on the outer tube of the
gas fired igniter can be carried out, this must
first be disconnected from the power head.