3-5
Chapter3 Advanced Operation
Paper ejection belt
Guide plate unit
2
Attach the guide plate unit to the
innermost center between the two
paper ejection belts.
Guide plate unit
Paper
ejection belt
SR set
4
3
Move the stacker rollers to "4."
While pressing the key, press the key to
change [SR set] to [4] from [5].
4
Press the key for test folding and
check if the paper is ejected smoothly.
If mis-feed or double-feed occurs, refer to
Chapter2 "Basic Operation" “1.Standard
Folding of Standard Paper” "1-3. Operation
Procedures ( p.2-2).
5
If the paper is not ejected smoothly,
change the position of the stacker
rollers again.
Folded sample
6
Check the finish of test folding.
Check for folding misalignment using the
second test folded sample.
If folding misalignments occur, refer to
Chapter 3 "ADVANCED OPERATION"“5.
Correcting Folding Misalignment”
( p.3-20)
Summary of Contents for TF MEGA-A
Page 17: ...1 7 Chapter1 Before Operation Memo ...
Page 70: ...6 2 Chapter6 Appendix Memo ...
Page 71: ...6 3 Chapter6 Appendix Memo ...
