1-5
Chapter1 Before Operation
Bearing support lever
Non-operator’s side
5
Turn the bearing support lever on the
non-operator’s side in the direction of
the arrow.
The bearing will be locked.
Because the bearing support lever presses
down the rubber roll, if it is not locked,
thick paper may not be folded properly.
6
Close the top cover.
2-4. Attaching the Parts
1
Attach the second folding plate.
Second folding plate
Lock lever
UNLOCK
LOCK
1) Move the lock lever of the second folding
plate to the position of “UNLOCK.”
2) Slide the second folding plate to the
machine along the shaft on each side of the
frame, then insert the U-shaped gutter on
the edge of each side into the shaft located
on the back of the frame.
3) Move the lock lever to the position of
“LOCK.”
Summary of Contents for TF MEGA-A
Page 17: ...1 7 Chapter1 Before Operation Memo ...
Page 70: ...6 2 Chapter6 Appendix Memo ...
Page 71: ...6 3 Chapter6 Appendix Memo ...
