background image

                                        Version:00.00

                   

Edition: 2008.04 

               

Dishwasher

                 

     

  Model: HEC9AFM/HEC9AFMS

 

 

 

3

3. Safety Precaution 

NOTICE 

Carefully read the instructions contained in this manual, as they provide important information which is 

essential to safe and proper installation, use and maintenance of the appliance. 

This appliance complies with the following EEC directives:

 

- 73/23/EEC of 19/02/73 (Low Voltage) and subsequent modifications;

 

- 89/336/EEC of 03/05/89 (Electromagnetic Compatibility) and subsequent modifications.

 

- Carefully dispose of the packing material. 

- After removing the packing, check to make sure that the appli-ance is not damaged. If in 

doubt, contact a qualified professional. 

- The dishwasher must only be used by adults for the washing of household dishes and 

cooking utensils. 

- Fundamental rules to follow when using the appliance: 

* Never touch the dishwasher when bare foot or with wet hands or feet; 

* We discourage the use of extension cords and multiple sockets; 

* During installation, the power supply cord must not be excessively or dangerously bent or 

flattened; 

* If the appliance is not operating properly or maintenance must be performed, disconnect 

the appliance from the power supply. 

- Keep detergents out of the reach of children, who must also be kept away from the 

dishwasher when it is open. 

- This appliance cannot be installed outdoors, not even if the area in which it is installed is 

covered by a roof; it is also very dangerous to leave it exposed to the rain and elements. 

- Do not touch the heating element during or after a wash cycle. 

- Do not lean or sit on the door when it is open, as this could overturn the dishwasher. 

- If the appliance malfunctions, turn off water supply to the appli-ance and disconnect the 

plug from the wall socket. Then, con-sult the section entitled, "Troubleshooting". If you can 

not solve the problem, contact a service centre. 

- Only specialised personnel are authorised to make repairs. 

- Appliances which are no longer being used must be made inoperable by cutting the power 

supply cord and removing the door lock. 

- The appliance must be positioned so that the plug is accessible.or feet; 

- The carpet must not obstruct the opening when the appliance in-stalling on the ground with 

carpet. 

- If the supply cord is damaged, it must be replaced by a special cord or assembly available 

from the manufacturer orits service agent. 

 

 

 

 

 

 

 

Summary of Contents for HEC9AFM




















Reviews: