
HP105 Plasma arc voltage height controller
第
- 8 -
页 共
23
页
Automatic standby state, the LCD second planetary number flashing, and
cycles through the following parameters
:
Standby mode, press the manual key to enter the manual mode,
then you must manually control the cutting height:
Standby mode, press arcing test, arcing into the test mode
:
Standby mode, press the Menu key, select 4, press the Enter key to enter the positioning test
mode
:
Set Arc Voltage:
This parameter is set automatically track ions and other torch
height.
Arc voltage value, the higher the torch distance. Arc voltage
value, the lower the torch distance.
Standby interface
1.
Setting arc voltage
2.
When initial positioning
3.
When arcing perforation