
HP105 Plasma arc voltage height controller
第
- 2 -
页 共
23
页
1.IMPORTANT INFORMATION
1.1 SERVICE ASSISTANCE AND CONTACT INFORMATION
For service assistance, have the following information available:
• HP105 model, part and serial number located on a label
• Type of cutting application you are using
1.2 RECEIVING AND UNPACKING
After receiving the HP105 you should:
• Carefully, unpack and inspect the equipment.
• Compare the received shipment with the packing list.
• Report any damage to the carrier and your representative.
• Store equipment that will not be used in a clean, dry location.
• Take appropriate precautions to prevent moisture, dust and dirt
from accumulating in storage and installation areas.
1.3 SAFETY CONSIDERATIONS
Safety practices should not be an after thought. Before installing
or servicing the controller, review and follow applicable policies and
procedures to ensure worker safety. Machinery must be in a safe
state and you must be aware of any additional hazards that can
arise.
1.4 PRE-INSTALLATION CONSIDERATIONS
Before installing the HP105:
• Check to be sure that you have all of the required parts.
• Familiarize yourself with the parts of the HP105.