6
ASSEMBLY INSTRUCTIONS
For Square Style (
model kn
-
a
,
kn
-
b
,
kn
-
c
,
kn
-
d
)
1.
Begin assembly by determining an appropriate location for your sauna (See ASSEMBLY TIPS &
WARNINGS for details). Place the FLOOR PANEL on the desired location.
NOTE:
On your model
the FLOOR HEATER is
pre-intsalled in the floor.
2.
Place the BACK SIDE PANEL on the FLOOR PANEL, lining up the BACK PANEL vertically and tightly
on the backside trim piece of the floor.
3.
Place the LEFT SIDE PANEL on the FLOOR PANEL in the same manner as step two. Insert the INNER
WALL CONNECTORS on the side into the three corresponding holes of the BACK SIDE PANEL,
then push down to lock panels together.
