HEATSTRIP TGH34PL Assembly And Operating Instructions Manual Download Page 10

Page: 10 / 34

MAINTENANCE AND CLEANING

To enjoy years of outstanding performance from

•

your appliance, regular services of the appliance is
mandatory as followings:
The appliance should be inspected before at least

•

one time a year by a Qualified Service only. More
frequent cleaning may be required according to the
use of the appliance.
Any guard or other protective device removed for

•

servicing the appliance must be replaced before
operating it.
Keep exterior surfaces clean, free and clear from

•

combustible materials.
Use warm soapy water for cleaning. Never use

•

flammable or corrosive cleaning agents.
While washing your unit makes sure to keep the area

•

around the burner assembly dry at all times. If the
gas control is exposed to water in any way, DO NOT
tries to use it. It must be replaced.
Burner and LPG compartment circulating air

•

passageways of the appliance must be kept clean.
Airflow must be unobstructed. Keep controls, burner

•

and circulation air passageways clean. Signs of
possible blockage include:
Gas odor with extreme yellow tipping of flame /

•

Appliance glow is excessively uneven / Appliance
makes popping noises.

STORAGE (after use)

Turn control knob in “OFF” position (full disk).

•

Disconnect LPG cylinder.

•

Store the appliance in a cool dry place away from

•

direct sunlight; store it upright in an area sheltered
from direct contact with inclement weather (such as
rain, sleet, hail, snow, dust and debris).
If desired, cover to protect exterior surfaces and to

•

prevent build up in air passages.
Note: Wait until appliance is cool before covering.

•

During periods of extended inactivity or when transporting:

Turn control knob in “OFF” position (full disk).

•

Disconnect LPG cylinder and move to a secure,

•

well ventilated location outdoors. DO NOT store in a
location that will exceed 50 °C.
Store appliance upright in an area sheltered from

•

direct contact with inclement weather (such as rain,
sleet, hail, snow, dust and debris).
If desired, cover appliance to protect exterior

•

surfaces and to prevent build up in air passages.
Note: Wait until appliance is cool before covering.

•

Spiders and insects can nest in burner or orifices.

•

This dangerous condition can damage the appliance
and render it unsafe for use. Clean burner holes by
using a heavy duty pipe cleaner. Compressed air
may help clear away smaller particles.
Carbon deposits may create a fire hazard. If any

•

carbon deposits develop, clean dome and engine
with warm soapy water.
For proper cleaning, a vacuum cleaner can be used.

•

Note: In a salt-air environment (such as near the
sea), corrosion occurs more quickly than normal.
Frequently check the corroded areas and repair
them promptly. Stubborn stains, discoloration and
possibly rust pitting can occur from exposure to
harsh outdoor conditions. Be careful not let any
powder or solvent come in contact with painted or
plastic components as damage may occur.
After long use, some discoloration can come up
and it screen is normal.

Please contact the Manufacturer or dealer for

•

information regarding replacement hoses,
thermocouples, igniters, lava rocks, etc.

Attention: Never use unauthorized parts or
component for this appliance.
Use only original equipment replacement spare
parts and components.
Otherwise may void the warranty of this product
and result in a hazardous condition.

TROUBLESHOOTING

Fault

Causes

Remedy

(a) Air in gas line

Purge gas line

(b) Blockage in gas line

Trace back and clear

Repair lead, electrode, piezo or replace battery

(d) Cylinder turned off

Turn on

(e) Cylinder empty