4
Step 4: Slide the Thermostat into the back box
Slide the thermostat into the back box. The metal brackets on the black
steel wall plate slide easily back into position.
Gently push the steel wire clip down locking the thermostat in place,
then clip the face plate into position. Note: To remove the face plate
whilst attached to the wall, gently push a flat headed screw driver in the
notch on the underside. You can now switch on your Thermostat.
It is the electrician’s responsibility to ensure any switches and/or
electrical components used are suitable and adequately rated for the
UFH system.
Wiring Guide
1. Floor temperature sensor (not polarity sensitive)
2. UFH system
3. Power supply (230V AC)
E a r t h
E a r t h
1
2
7
6
5
4
3
1
2
3