Heatscope MHS-NM2400, Original Installation And Instruction Manual

Page: 33 / 42

A M B I E N T H E A T I N G S O L U T I O N S
WARRANTY EXCLUSIONS
Damage or defects caused by improper handling or operation as well as defects caused by using non-
original parts or the use of accessories not recommended by the manufacturer are not covered by the
warranty.
The warranty does not cover damages caused by external influences such as fire, lightning or any trans -
port damages. Liability for consequential damages to persons or property is excluded.
If the serial number of the unit has been changed, removed or defaced, the warranty will be invalid.
All warranty claims shall be forfeited if the unit is opened, altered, modified, rebuilt or repaired by a per -
son not authorized by the manufacturer.
The declaration of conformity (CE, WEEE, RoHS) is available upon request from the manufacturer.
EN
No action is needed to switch the device between 50Hz and 60Hz.
The product will adapt itself for both 50Hz and 60Hz.
TECHNICAL DATA HEATSCOPE
®
NEXT HEATSCOPE
®
PURE
Operating voltage 220-240 V AC ~, 50/60 Hz 220-240V AC ~, 50/60 Hz
Power at 240 V AC~ 2500 W / 3200 W
Current 10.43 A / 13.33 A
Power Cord 1.1 m / 4 x 1.5 mm 2
Max. surface temperature / front ≤ 400 °C ≤ 300 °C
Max. housing temperature ≤ 120 °C ≤ 120 °C
Filament temperature 1100–1300 °C
Heating impact in 15 Sek. 30 Sek.
Max. visible light ≤ 600 lumen ≤ 300–400 lumen
Installation height min. 1.8 m / max. 3.0 m min. 1.8 m / max. 2.7 m
IP protection class IP 25 IP 65
Manual control ON/OFF + 100%, 50%
Remote control (SMARTBOX) ON/OFF + 100%, 50%
Measurements / Weight 1044 x 166 x 87 mm / 7.5 kg