Heatsail Dome Bow Bracket, Manual, Page: 41 / 84

41 User manual
EN
7. Troubleshooting
The electrical supply must be disconnected via the installation’s main
breaker before any work can be carried out.
The light does not work
Switch off power. Lift the glass of the the DOME upwards. Insert a rigid item
(like a screwdriver) underneath the glass to keep it up. You can now access
the halogen bulb. Verify it is well-seated and not broken. If you need to
replace the bulb, replace it with a standard R7S 78mm, 230V/120W bulb.
Note: Always use a cloth or gloves to replace the bulb, touching it with
bare hands shortens the life considerably.
If this does not resolve your issue, verify that the blue and brown wires are
properly inserted into the connection block. Refer to Step 11.
No heat
Check if the DOME is switched on.
Verify that the all wires are properly inserted into the connection block.
Refer to Step 11.
Only some elements are heating
If elements are not working (See Step 11) and verify that the black and gray
wires are securely connected in the proper terminals.
Nothing works
Verify that the all wires are properly inserted into the connection block.
Refer to Step 11.
Verify that the circuit breaker switch is not tripped/is turned on.