Heatsail Dome Bow Bracket, Manual, Page: 26 / 84

26 Heatsail DOME® Bow bracket
EN
1. Electrical safety regulations
& requirements
The use of the DOME requires an electrical system with sound safety
grounding. The electrical safety of the device is only assured if it is cor-
rectly connected to a grounding system built in accordance with safety
regulations. It must be inspected before use. If anything is unclear, a quali-
fied and authorised person must be consulted. Heatsail is not responsible
for damage caused by an ungrounded device.
The installation of the DOME electrical components requires a main
connection of 230V-50/60Hz (16 amp fuse and appropriate RCD); the
connection must be properly implemented in accordance with the
applicable IEC-CEI standards.
Please note: Statutory and other local regulations may apply. The electrical
power supply will need to be interrupted before the connection or other
work on the electrical components can be carried-out and everyone must
satisfy themselves that the power can’t be switched on again accidentally.
Adapters, power strips and extension cords may not be used for the
DOME electrical supply. A switch must be installed between the DOME
and the fuse box at all times. Noncompliance with these instructions may
compromise the safety of the device. Heatsail will not be held liable for
any damage resulting from these issues.