Heatrae Sadia Aquatap Boil and Ambient, Installation And User Manual

Page: 17 / 36

17
10.6 The “TEMPERATURE READY” indicator light on the Aquatap heater unit and the
“READY” LED on the dispenser tap will flash. This indicates that the unit is in the self-
commissioning mode. Whilst in this mode, the water will not be hot enough for use. Do
not draw any water off during the self - commissioning mode.
READY LED
BOILING WATER
LED
FIGURE 12 : LED POSITIONS (DISPENSER)
SAFETY BUTTON
HOT WATER
BUTTON
CHILLED/AMBIENT
WATER BUTTON
FIGURE 11 : FRONT COVER REMOVAL
FASCIA
SECURING
SCREW
COVER
SECURING SCREWS
HOOK TOP EDGE
OF FASCIA INTO
COVER
APERTURE
TOP COVER
SECURING
SCREWS
MAIN COVER
BLUE LED (BOTTOM)
ORANGE LED (TOP)