OPERATION
HeatNet Control REV 1.38-1
Page 66
* Status Information
Whenever an * is displayed on the RUN screen it indicates that there is more information available about the current running
conditions. This information can be viewed by going to the *STATUS screen as shown on the previous page. For more
information on the parameters discussed here please see the
Default Settings & Menu Item Descriptions — SETUP
, starting on
page 46.
Status information screens
This screen indicates that the boiler’s SUPPLY
Temperature has gone above the OPERATOR
LIMIT. This will mainly be seen on member
boilers to show why they are not available to
fire.
This screen indicates that the boiler’s SUPPLY
temperature has risen inside the OPERATOR
LIMIT BAND.
This screen indicates the boiler’s input is being
limited by the MOD-MAX value to optimize
system efficiency. This will only be seen on a
MASTER boiler.
