3
Model:
UH8-RF V2
Installation
The UH8-RF V2 can be mounted directly to a wall using four screws or
alternatively, the unit can be DIN rail mounted.
When DIN Rail mounting, you first need to insert the two clips
provided on the back of the UH8-RF V2, as shown in the image;
•
On the back of the UH8-RF V2, position the clip in the middle
and slide down.
•
Points A and B locate in the corresponding holes and lock
into place.
•
Locate the UH8-RF V2 onto the DIN rail from the top.
•
Pull the clip down and push the bottom of the UH8-RF V2 onto
the DIN rail.
•
Releasing the clip will lock the UH8-RF V2 in place on the
DIN rail.
To remove the UH8-RF V2, pull both clips down and remove from the
DIN rail.
B
A
Insert clip here.
Then Slide down to lock in place.
Summary of Contents for UH8-RF V2
Page 1: ...Model UH8 RF V2...
Page 10: ...Notes Wiring Centre 10...
