Heatmiser Touch-RF, Manual

Page: 28 / 36

27
Wireless Series
Section Header
Optional Settings - Feature Table
01
02
03
04
05
06
07
08
09
10
11
12
13
14
15
16
17
FEATURE
Temperature Format
Switching Differential
Not used
Frost Protection Temperature
Output Delay
UH8-RF or RF-Switch Receiver
Receiver Board Address
Zone Number
Underfloor Heating or
Radiator (UH8-RF Only)
Fail Safe
Up/Down Limit
Not Used
Not Used
Preheat Setting
Rate of Change
5/2 Day, 7 Day or
24hr Programming
Thermostat Mode
DESCRIPTION
00 = °C
01 = °F
(°C = Default)
0.5° - 03°C (1.0°C = Default)
Not used
07º - 17ºC (12ºC = Default)
00 - 15 Minutes (00 = Default)
00 = UH8-RF, 01 = RF-Switch (00 = Default)
UH8-RF = 01-99
UH8-RF = 01-08, RF-Switch = Not Used
Underfloor Heating = 00, Radiator Zone = 01
00 Disabled, 01 Enabled (01 = Default)
00º - 10ºC (00ºC = Default)
Not Used
Not Used
00-03 hours (00 = default)
Minute to raise 1ºC
00 = 5/2 day, 01 = 7 day (00 = default)
03 = 24 hours
00 = Manual, 01 = Programmable,
02 = Progra Hot Water
01 01 Temperature Format Temperature Format 00 = 0 °C
01 = °F
(°C = Default)
03 Not used Not used
05 Output Delay 00 - 15 Minutes (00 = Default)
07 Receiver Board Address UH8-RF = 01-99
09 Underfloor Heating or
Radiator (UH8-RF Only) Underfloor Heating = 00, Radiator Zone = 01
11 Up/Down Limit 00º - 10ºC (00ºC = Default)
13 Not Used Not Used
15 Rate of Change Minute to raise 1ºC
17 Thermostat Mode 00 = Manual, 01 = Programmable,
02 = Progra Hot Water
SETTING